Fishman Platinum Stage External EQ/DI Effects Pedal - PROPLT301
Reserve one now. We will contact you with an estimated delivery date. Questions? Contact us here.
- DETAILS
OVERVIEW
Intended for acoustic guitar, bass, or any other acoustic instrument with a pickup and a 1/4" output, the Fishman Platinum Stage EQ is a belt-mountable preamp and DI boasting an analog signal path and tone-shaping options. Connections are possible via 1/4" input and 1/4" output jacks, though there’s also an XLR DI for feeding audio straight to the house’s PA, mixer, or a recording interface. This output is pre-/post-EQ switchable, meaning you can route a tonally shaped or unprocessed signal through this section of the preamp. It can also provide 48V phantom power to the unit.
The preamp itself utilizes a high-headroom Class-A design, with a four-band EQ section that can be voiced separately, by means of a switch, for bass and guitar. A phase switch aids you in the never-ending battle against feedback in live scenarios.
To add a little more volume for solos or other stand-out sections, a boost button has been provided, its level of gain adjustable by means of a wheel located next to the button. Simply depress this button to engage the boost. You’ll also find an input trim pot to better attenuate your pickups to the signal path provided by the Platinum Stage. It comes with a belt clip for easy on-stage attachment to your person. In addition to drawing upon 48V phantom power, the unit can run using a 9V battery, or with an optional power supply.
SPECIFICATIONS
| Audio Connections | 1 x 1/4" instrument input, phone type 1 x 1/4" instrument output, phone type 1 x XLR DI output |
| Tone Controls | Low Cut control: 30, 80, and 160 Hz Bass control: ±12 dB at 150 Hz (guitar), ±12 dB at 115 Hz (bass) Middle control: ±12 dB at 200 Hz to 3.1 kHz; Q = 1.3 Treble control: ±12 dB at 6 kHz (guitar), ±12 dB at 3 kHz (bass) |
| Controls | Volume knob Bass knob Mid Freq knob Treble knob Middle knob EQ Mode selector Low Cut selector Pre-/Post-EQ selector Phase In/Out selector Boost button Boost wheel Input trim pot |
| Impedance | Input: 10 MOhms Output: 1 kOhm (amp, nominal); 600 Ohms (XLR DI, nominal) |
| Input Trim | Gain range: -6 to +14 dB |
| Output | Amp level: -∞ to +6 dBV XLR level: -10 dB relative to input (pre EQ), -6 dB relative to input, (post EQ) |
| Noise | Baseline: -93 dBV, A-weighted |
| Dynamic Range | 100 dB, A-weighted |
| Power Supply | 9 V battery, 48 V phantom power, or 9 V adapter (available separately) |
| Power Adapter | Fishman 910-R (for 110 V) or suitable filtered and regulated, 200 mA type, tip = negative |
| Current Consumption | 7 mA, typical in-use |
| Battery Life (approx.) | 70 hours using alkaline battery |